• Skip to primary navigation
  • Skip to main content
nGuard

nGuard

Call us p. 704.583.4088
  • Solutions
    • Security Assessments
    • Compliance
    • Cyber Security Incidence Response
    • Penetration Testing
    • Managed Event Collection
    • Vulnerability Management
    • Red Teaming
    • Mobile Security
    • Cloud Security
  • Industries
    • Healthcare
    • Energy
    • Information Technology
    • Manufacturing
  • About Us
    • Our Company
    • Careers
    • Blog
  • Contact
Client PortalSpeak to An Expert

mecc

TWiC | U.S. House Data Leak, ICS Attacks, FortiOS Vulnerability, Cyber Insurance

FBI Investigating Data Breach Affecting U.S. House of Representatives Members and Staff

The Federal Bureau of Investigation (FBI) is investigating a data breach affecting members and staff of the U.S. House of Representatives. The breach saw account and sensitive personal information belonging to them and their families stolen from the servers of DC Health Link, which administers their health care plans.

While US House Chief Administrative Officer Catherine L. Szpindor has said, “it was unclear how many people had been affected by the breach.” A sample of the data reportedly posted on a hacking forum showed details of around 170,000 people. The information included names, dates of birth, addresses, email addresses, phone numbers, and Social Security numbers. At least one threat actor has reportedly put the data up for sale.

nGuard’s MECC (Managed Event Collection and Correlation) can help protect against malicious attacks by collecting and analyzing log data from various sources. MECC can then alert security teams to potential threats and provide them with the information they need to investigate and respond to an ongoing or potential attack. Should your organization fall victim to an attack like this, call nGuard to help with our Cyber Security Incident Response services.

New FortiOS and FortiProxy Critical Vulnerabilities

Fortinet has released patches to address 15 security flaws, including one critical vulnerability in FortiOS and FortiProxy that could allow an attacker to take control of affected systems. The buffer underwrite flaw (CVE-2023-25610) is rated 9.3 out of 10 for severity and was discovered by Fortinet’s internal security teams. The vulnerability could enable a remote, unauthenticated attacker to execute arbitrary code on the device or cause a denial-of-service attack. Fortinet has not yet seen any malicious exploitation attempts against the flaw, but users are urged to apply the patches quickly, as prior flaws in software have been actively abused in the wild. Workarounds include disabling the HTTP/HTTPS administrative interface or limiting IP addresses that can reach it. Just last week, nGuard wrote about another Fortinet critical vulnerability that was actively being exploited. As this continues to develop, nGuard has a number of solutions that can help your organization stay ahead of the curve, including internal penetration testing and vulnerability management.

Over 40% of Industrial Control Systems (ICS) Were Attacked in 2022

Over 40% of industrial control systems (ICS) computers globally experienced malicious attacks in 2022, according to Kaspersky research into telemetry statistics. The report highlighted growth in Russia, which saw a 9% increase in malicious activity in 2022, but Ethiopia was the top target overall with 59% of its ICS footprint seeing malicious activity.

Kaspersky noted that blocked malicious scripts and phishing pages targeting ICS were particularly common threats, seeing an 11% rise from 2021. The percentage of ICS computers experiencing malicious activity varied from 40.1% in Africa and Central Asia to 14.2% and 14.3% respectively in Western and Northern Europe. nGuard has been helping protect Industrial control systems, SCADA networks, and critical infrastructure for over 20 years with security assessments, penetration testing, incident response, and managed SIEM services.

Low-coverage Cyber Insurance Plans Help Meet Compliance and Contractual Requirements

As the cyber insurance market experiences a surge in claims for ransomware attacks, insurance carriers and brokers have started imposing tighter rules on the companies that can qualify for coverage, raising prices and reducing the amount of coverage offered per policy. nGuard recently wrote about requirements needed to obtain cyber insurance. Policy coverages have significantly dropped in recent times, with some as low as $5m, and some companies cannot purchase as much insurance as they would like. However, some contracts and compliance regulations require that a company have a cyber insurance policy, which can pose a problem for those that lose coverage. Basic policies are now available for more organizations to obtain affordable coverage, allowing them to avoid a breach of compliance and fulfill contractual obligations.

Filed Under: Advisory, Breach, Compliance, Events, Financial, General, Products & Services, Vulnerabilities & Exploits Tagged With: CVE-2023-25610, cyber insurance, data breach, fbi, FortiOS, FortiProxy, ICS, Incident Response, insurance, internal penetration testing, Kaspersky, malware, mecc, Penetration Testing, SIEM, U.S. House of Representatives, vulnerability management, Vulnerability Scans

Attacking FortiNAC Devices: Experts Advise Updating

A serious vulnerability in Fortinet’s FortiNAC network access control suite (CVE-2022-39952) is now being exploited by hackers to add a cron job that starts a reverse shell on vulnerable systems as the root user. This unauthenticated file path modification vulnerability poses a major security risk for enterprises using the FortiNAC solution because it may be used to execute commands remotely.

Fortinet has already released security upgrades to remedy the issue, and has recommended that users update susceptible appliances to the most recent versions. As the corporation hasn’t offered any mitigation advice or workarounds, updating is the only option to prevent attacks. Researchers from cybersecurity firms, including Shadowserver Foundation, GreyNoise, and CronUp, have recently observed attacks on CVE-2022-39952 from a variety of IP addresses. This indicates that attackers have already started focusing on unpatched FortiNAC devices.

Horizon3 security researchers have created proof-of-concept (PoC) exploit code which allows hackers to add a cron task that starts a reverse shell on vulnerable systems. Fortinet had previously issued a warning in December 2022 to customers to patch FortiOS SSL-VPN appliances against an actively exploited security flaw (CVE-2022-42475), which was also used as a zero-day in attacks against targets associated with the government.

In reaction to what it called “sensationalized claims” about recent exploitation attempts aimed at a vulnerability in its FortiNAC network access control product, Fortinet has offered some crucial clarifications. The company emphasized that it is yet unclear how exploiting CVE-2022-39952 will actually affect users. However, FortiNAC users should be aware of the possible hazard, as knowledgeable threat actors have been known to attack Fortinet products.

FortiNAC administrators are highly advised to update their software right away to a version of the software that is not impacted by the CVE-2022-39952 vulnerability. This includes FortiNAC versions 9.4.1 or later, 9.2.6 or later, 9.1.8 or newer, and 7.2.0 or later. Organizations may stop hackers from using this important vulnerability to gain access to their corporate networks by heeding this advice.

At nGuard, we understand the importance of proactive security measures to protect our clients from the evolving threat landscape. That’s why we offer a range of security services designed to help detect vulnerabilities like the FortiNAC vulnerability, including internal penetration testing, vulnerability management, and strategic security assessments. Our team of experts can work with clients to develop and implement policies and procedures to ensure they can quickly identify and address security threats, and stay up-to-date on emerging vulnerabilities through our security advisories. By partnering with nGuard, clients can rest assured that they have access to the latest security technologies and expertise to help them stay one step ahead of the threats.

Filed Under: Advisory, Breach, Compliance, Events, Financial, General, Products & Services, Vulnerabilities & Exploits Tagged With: Center For Internet Security, CIS, cyber insurance, mecc, Penetration Testing, phishing, ransomware, security awareness training, SIEM, social engineering, Vulnerability Scans

Are You Prepared for the New Cyber Insurance Requirements?

As cyberattacks increase worldwide, insurance companies are tightening their cyber insurance policy requirements. This is due to the 80% rise in ransomware attacks last year, leading to a large number of claims. Among the new provisions are the requirement for multi-factor authentication (MFA) for all admin access and the protection of all privileged accounts. However, identifying gaps in MFA and privileged account protection within a network can be challenging for organizations. In addition to MFA, there are several other requirements that stipulate detailed attestation when filling out a cyber policy questionnaire. A few of those requirements are:

  1. Security Awareness Training and Testing
    This process is designed to educate employees on cyber security threats and risks, and to test their understanding of these issues through interactive simulations and assessments. The goal is to raise awareness, increase knowledge, and promote safe online behavior within an organization. To reduce your risk of phishing attacks, nGuard has been conducting Security Awareness Training and phishing testing though our Social Engineering Assessment for years.
  2. Vulnerability Management
    A thorough vulnerability management program will identify, assess, and prioritize vulnerabilities in an organization’s systems and networks, and take action to remediate or mitigate these risks to prevent exploitation. This helps maintain the security and integrity of systems and data by staying on top of vulnerabilities as they are discovered. Conducting monthly or quarterly vulnerability scans on an ongoing basis will not only help meet insurance requirements but also keep your network secure. nGuard’s Vulnerability Management can help you manage your external environment, internal environment, and meet PCI requirements with ASV scanning.
  3. 24/7/365 Monitoring
    A Security Information and Event Management (SIEM) system collects and aggregates log data from various sources within an organization and uses analytics and threat detection techniques to identify potential security incidents and enable security teams to respond promptly. SIEM provides centralized security visibility and event correlation. nGuard’s managed security team performs both manual and automated daily log analysis that proactively detects suspicious activity in your environment with our managed SIEM service called Managed Event Collection & Correlation. nGuard is adding artificial intelligence and machine learning to detect and respond to security threats in real-time via UEBA (User and Entity Behavior Analytics).
  4. Secured, Encrypted, Offsite Backups
    Offsite backups refer to the storage of backup data at a remote location, typically in a secure data center, separate from the primary data storage. This helps ensure that the data can be recovered in case of a disaster or cyberattack and protected against data loss while minimizing downtime. Offsite backups are an important component of a comprehensive disaster recovery plan. A Strategic Security Assessment utilizing the Center for Internet Security (CIS) 18 Critical Security Controls as the foundation can help bring the lack of controls like this and others to light.
  5. Endpoint Detection & Response (EDR)
    This real-time security solution will monitor and respond to security threats on endpoint devices such as computers and servers using artificial intelligence and machine learning to detect and isolate security incidents.

As insurance carriers adjust the requirements to obtain and maintain coverage, a thorough assessment can help organizations identify and close security gaps to help meet the new cyber insurance requirements and improve their overall security posture. nGuard has a number of solutions that can help meet and exceed the requirements needed to obtain and maintain cyber insurance.

Filed Under: Advisory, Breach, Compliance, Events, Financial, General, Products & Services, Vulnerabilities & Exploits Tagged With: Center For Internet Security, CIS, cyber insurance, mecc, Penetration Testing, phishing, ransomware, security awareness training, SIEM, social engineering, Vulnerability Scans

Microsoft Exchange Zero-Days Mitigated, Then Bypassed!

Earlier this month two new zero-day exploits, CVE-2022-41040 and CVE-2022-41082, were released and code named ProxyNotShell due to similarities to another set of flaws called ProxyShell. nGuard covered one of the more recent Exchange zero-day vulnerabilities last year in another security advisory.

CVE-2022-41040 is a Server-Side Request Forgery (SSRF) vulnerability with 8.8 severity score out of 10. CVE-2022-41082 has been rated a 6.3 severity score out of 10 and allows Remote Code Execution (RCE) when PowerShell can be access by a malicious attacker. These vulnerabilities affect Microsoft Exchange Server 2013, 2016, and 2019 for on-premises deployments. Microsoft stated, “While these vulnerabilities require authentication, the authentication needed for exploitation can be that of a standard user. Standard user credentials can be acquired via many different attacks, such as password spray or purchase via the cybercriminal economy.”

If an attacker can successfully exploit these vulnerabilities, they can compromise the victim’s system, obtain a web shell and install it, then attempt to pivot to other hosts on the network for further compromise. Microsoft said, with medium confidence, they can attribute many of the already carried out attacks to state-sponsored actors. These state-sponsored actors installed the China Chopper web shell to facilitate hands-on-keyboard access, which the attackers used to perform Active Directory reconnaissance and data exfiltration.

Microsoft has yet to release a patch for these vulnerabilities but did release workarounds for these two zero-days. However, shortly after their release it was discovered the recommended fix could be easily circumvented. This caused Microsoft to rewrite the mitigation to take this into account:

  1. Open IIS Manager
  2. Select Default Web Site
  3. In the Feature View, click URL Rewrite
  4. In the Actions pane on the right-hand side, click Add Rule(s)…
  5. Select Request Blocking and click OK
  6. Add the string “.*autodiscover\.json.*PowerShell.*” (excluding quotes)
  7. Select Regular Expression under Using
  8. Select Abort Request under How to block and then click OK
  9. Expand the rule and select the rule with the pattern: .*autodiscover\.json.*Powershell.* and click Edit under Conditions
  10. Change the Condition input from {URL} to {REQUEST_URI}

Microsoft also released a PowerShell script to apply the mitigation.

Outside of the Microsoft mitigations, you can protect your organization by:

  • Updating firewall rules, IPS, IDS systems to block known IP addresses targeting this vulnerability. You can download an updated list of malicious IPs and manually enter them in your perimeter protection devices.
  • Implementing multi-factor authentication (MFA) and training users not to accept unwanted MFA prompts.
  • Disabling Exchange Legacy Authentication.
  • Having a SIEM to help respond to ongoing threats to your environments based on correlating events from logs.
  • Ensuring you have a robust vulnerability management program in place to stay on top of the latest threats.
  • Conducting penetration testing on a frequent basis to ensure that attackers have limited or no path to pivot throughout your networks.
  • Either having an Incident Response retainer in place or having a pre-selected vendor to call should your organization fall victim to zero-days like this or any other attack.

Filed Under: Advisory, Breach, Compliance, Events, Financial, General, Products & Services, Vulnerabilities & Exploits Tagged With: China Chopper, CVE-2022-37969, CVE-2022-41040, CVE-2022-4182, exchange, Incident Response, malware, mecc, MFA, Microsoft, Penetration Testing, vulnerability, windows

TWiC | Lapsus$ Ransomware, LastPass Hack & MS ZeroDay

The past couple of weeks have been busy ones for the world of cybersecurity. Multiple companies have disclosed serious hacks that have led to breaches of customer data and overall system availability. In this week’s security advisory, nGuard will detail some of these incidents and their impact on the cybersecurity landscape.

Cisco Data Breach Attributed to Lapsus$ Ransomware Group

The Lapsus$ crime gang is back at it again with an attack on the networking giant, Cisco. About a month ago, Cisco had disclosed that its systems were breached. A social engineering attack led adversaries on a pathway to overtaking an employee’s Google account. Saved credentials were then obtained from the browser and voice communications were utilized to trick the unsuspecting employee into accepting a multi-factor authentication push notification. Cisco believes the end goal of the attacker was to deploy ransomware on the network after gaining access to multiple systems. Cisco is reporting that attempts to deploy ransomware were unsuccessful.

LastPass Says Hackers Had Internal Access For Four Days

Lastpass reported a breach back in August and are now releasing some more details about the compromise. They are now reporting that an attacker had internal access to the company systems for four days before they were detected. Lastpass worked with a cybersecurity firm to investigate the incident and found that no customer data or password vaults were accessed during this time. LastPass maintains that your master password, and the keys used to encrypt and decrypt data, are never sent to LastPass’ servers, and are never accessible by LastPass. The attacker was however able to access a developer endpoint and poke around the development environments.

Microsoft Patches a New Zero-Day Affecting All Versions of Windows

Microsoft is patching another zero-day vulnerability affecting all supported versions of Windows. This zero-day is reported as being used in real-world attacks. CVE-2022-37969 is a privilege elevation flaw in the Windows Common Log File System Driver. This is utilized for data and event logging. Once a system is compromised, this vulnerability can be used to escalate user privileges to the highest level, SYSTEM. 4 different security firms reported this vulnerability to Microsoft which makes them believe this could be widely used in real-world scenarios. They recommend patching immediately.

nGuard closely monitors trends in the world of cybersecurity and applies those trends to assessment activities and managed security services. Having penetration testing conducted periodically against network assets, web applications, and other critical infrastructure can prevent data breaches before they happen. Putting your employees through social engineering campaigns to test their security readiness can boost awareness. Having a security first mindset is essential in protecting the valuable data of organizations.  

Filed Under: Advisory, Breach, Compliance, Events, Financial, General, Products & Services, Vulnerabilities & Exploits Tagged With: cisco, CVE-2022-37969, Incident Response, Lapsus, Lapsus$, lastpass, malware, mecc, MFA, Microsoft, Penetration Testing, phishing, vulnerability, windows

Vulnerability Exploits Overtake Phishing as Initial Attack Vector

Most security professionals will advise the number one way attackers gain an initial foothold on a network is, and continues to be, phishing and social engineering attacks. Palo Alto recently released their 2022 Incident Response Report which confirmed what most would say is true. At a combined 42%, phishing and social engineering make up almost half of all means of initial access.

The second most common way according to the above chart from Palo Alto is software vulnerabilities. However, in the first week of September, Kaspersky released its 2021 Incident Response Overview and it told a different story. 53.6% of the initial attack vectors they responded to were exploits of public-facing applications.

2021 had no shortage of time sensitive critical vulnerabilities including Log4j, Microsoft Exchange ProxyLogon, and three other CVEs related to the ProxyLogon vulnerabilities that were released in March of 2021. When these vulnerabilities are made publicly available it is only a matter of minutes before publicly facing systems are being scanned for vulnerable targets. Within hours, proof of concept exploits become available leading to an extremely high rate of organizations falling for such attacks.

In recent years, organizations have prioritized security awareness training and conducted social engineering and phishing training. But have those same organizations made it a priority to have a vulnerability management program in place?

How can organizations stay ahead of these attack trends? Start by building out a mature security program that includes annual penetration testing, ongoing vulnerability scanning, and a properly configured SIEM to alert on network anomalies. If you suspect a breach, identify a firm capable of responding to security incidents and secure an incident response retainer. Lastly, have an expert conduct a strategic security assessment to compare your organization’s security program to a known security standard like the Center for Internet Security Critical Security Controls.

Filed Under: Advisory, Breach, Compliance, Events, Financial, General, Products & Services, Vulnerabilities & Exploits Tagged With: Center For Internet Security, CIS, exploit, Incident Response, Kaspersky, malware, mecc, MFA, Palo Alto, Penetration Testing, phishing, sa, vulnerability

  • Go to page 1
  • Go to page 2
  • Go to Next Page »
nGuard

nGuard

3540 Toringdon Way
Suite 200
Charlotte, NC 28277-4650

info@nGuard.com

Client Portal

Solutions

  • Security Assessments
  • Compliance
  • Cyber Security Incident Response
  • Penetration Testing
  • Managed Event Collection
  • nGuard Vulnerability Management
  • Mobile Security
  • Cloud Security

Industries

  • Energy
  • Healthcare
  • Manufacturing
  • Information Technology

About Us

  • Our Company
  • Careers
  • Blog

© 2023 nGuard. All rights reserved.

  • Privacy Policy